Metal clay shrinkage calculator for rings

Metal clay — silver clay like Art Clay Silver or PMC — shrinks when sintered because the binder burns away: between 8% and 15% depending on the brand. A ring made directly at your size will come out small. This calculator tells you what size and diameter to make the raw piece (or the mold master) so that after firing it lands exactly on the final size.

The % varies by brand, type and even batch — always check the package. On rings, effective shrinkage can be a bit higher than nominal (the band shrinks against itself): when in doubt, test with your clay.

Typical shrinkage by brand

ClayTypical shrinkage
Art Clay Silver (650)8–10%
PMC310–12%
PMC Flex12–15%
EZ960 (sterling 960)10–11%
PMC Standard (legacy)up to 28%

The full workflow: from 3D design to silver ring

  1. Design the ring in 3D at its final size.
  2. Export the scaled master with your clay's % (the Menros editor does it with one button).
  3. Print the master in resin and make a silicone mold.
  4. Press the silver clay into the mold and let it dry.
  5. When leather-hard, file and refine the details.
  6. Sinter (kiln or torch depending on the clay) — this is where it shrinks to your size.
  7. Brush, burnish and polish.
Design my ring with the master already scaled →